MS118-76
Nant Gwernol Station Building
£24.99
/
Tax included.
Shipping calculated at checkout.
Nant Gwernol is the final station on the Talyllyn railway. In 1976, an extension was built from Abergynolwyn to the new station at built at Nant Gwernol.
This model depicts the station in its current form, available with or without the roof window.
The station is constructed from wood, on a concrete base with slate roof. The base provided has the bench attached. To assemble, simply slide the two front posts into the base and slot the base in, the posts are quite flexible which aids this quite a lot. Complete with 2 internal advertising boards, 1 external, name plate and litter bin.
This model depicts the station in its current form, available with or without the roof window.
The station is constructed from wood, on a concrete base with slate roof. The base provided has the bench attached. To assemble, simply slide the two front posts into the base and slot the base in, the posts are quite flexible which aids this quite a lot. Complete with 2 internal advertising boards, 1 external, name plate and litter bin.
Product Information
Assembly
All of our products ship as fully assembled models unless stated otherwise. If the model is in kit form, instructions are provided and we are more than happy to help if you're stuck, simply contact us on the form below. The colours of the models you receive may vary from the images shown, however they will usually be dark grey, and this makes no difference to the quality or finish of the product.
Post Processing
Although effort has been taken to remove all support material, some stubs may remain. These can easily be eradicated with light sanding or filing. Please ALWAYS use a respirator when sanding resin. Take care around delicate areas however, as resin is very brittle, especially around parts such as window frames/thin parts.
Finishing
It is advised to prime your model before painting, however models will accept paint without priming first. Tamiya Fine Surface Primer is recommended. After priming, the models work well with any types of paint usually used for modelling, alongside washes, weathering powders etc. Models do NOT need washing prior to being painted. Both heat and water damage 3D printed resin. Any damage caused by this is non-refundable. Models are NOT suitable for garden railways/outdoor use. It's best to seal your model with matte varnish after painting, to protect against water absorption from high humidity environments.
Refund policy here - Refund policy – MS Models
Quality
Refund policy here - Refund policy – MS Models
Quality
Should you find yourself in the unlikely scenario where you are dissatisfied with the product which you receive, or you receive a product which does not meet the quality level you expected, please contact us and we will do our best to rectify the situation as soon as possible.
Scales
Should you have a wish to obtain a product which is not readily available in your chosen scale, please contact us and we'll be happy to assist you and do our best and compromise to work things out, however sometimes some items are not feasible to produce in all scales.
Please make you understand what scale you are modelling prior to ordering - OO9 and N gauge are NOT the same scale although they run on the same width track!
Bespoke Models/Product Requests
We are currently not accepting bespoke model requests.
Should you want to request a product, please contact us using the form below, however please be aware that some things are not feasible to produce due to a number of reasons.
General Tips
It's best to leave your items out of direct sunlight and heat, as they are prone to warping in excessive temperatures. We can't be held liable for any incidents which occur due to this.
Superglue is recommended if your product requires assembly, as our prints are resin poly cement does not work.
Last revision 04/01/2024
Please make you understand what scale you are modelling prior to ordering - OO9 and N gauge are NOT the same scale although they run on the same width track!
Bespoke Models/Product Requests
We are currently not accepting bespoke model requests.
Should you want to request a product, please contact us using the form below, however please be aware that some things are not feasible to produce due to a number of reasons.
General Tips
It's best to leave your items out of direct sunlight and heat, as they are prone to warping in excessive temperatures. We can't be held liable for any incidents which occur due to this.
Superglue is recommended if your product requires assembly, as our prints are resin poly cement does not work.
Last revision 04/01/2024
